Contacts RU
 Download
 Cutter 2.57
 Cutter 1.44 free!
 JFCreator
 S-Attractor
Pavlova N.I. is autor of calculated method for " Cutter ".

More 40 years of sewing experience.

Compatible with Win7
 |  Cutter 2.57 | JFCreator |  S-Attractor |  FAQ |  Photos | 
Customer Care Center
Quickbuy ($40)

Those who able to sew also know as frequently appears difficulty of using of an exist patterns on a figure of a concrete customer, when without many additional fitting and adjusting to custom figure a pattern will not succeeded correctness. This solution, released in the program "Cutter", by comparison, is little known..

Process of modelling can be divided into 3 stages. The first stage of modelling is working at solution of a dress composition, performance of the sketch of model and selection of a material to it. The second stage is definition of control areas and points on the basic pattern and drawing style lines. The third stade is development of patterns. The initial stage of a patterns development is..
"The Cutter" program does the calculation and pattern making with the following printout of the drafts in scales 1:1, 1:2, 1:4 on any size paper.

The author's technique provides calculation of a basic patterns to within 1 mm appropriate to the entered measurements and eases that allows to make a dress almost without closing alterations. That makes a individual tailoring competitive on quality, speed and the price.

Garment design involves 2 stages of drafting: the 1st stage is drafting a basic pattern, the 2nd is drafting decorative lines and making cutting alterations.

The drafting of a basic pattern is the drafting of a design scan of smoothed outlines of human figure with the necessary eases and decorative finishing based on the basic body measurement points. The first stage (drafting a basic pattern) is the most labor-consuming one, though if fashion or models change, the rules of drafting a design and the calculation formulas remain constant. The calculation method is based on more than 40 years of sewing experience.

This program releases a cutter or designer from the routine work of pattern making or adjusting the already made patterns to fit the custom measurements and gives broad opportunities for creativity.

A basic pattern is being made to fit a figure of the person whom the measures are taken from and there is a possibility to sew a garment without additional fitting and adjusting to custom figure. You can make all necessary alterations on the printout of a basic pattern, and then lay it out to the fabric, using a table of measurement results and cutter's drawing scale if you need to alter anything.

Presently version (2.57) enables you to make the basic patterns of shoulders garments (those you wear on your upper half) namely lady's dress, jacket, autumn and winter coat of straight and adjoining silhouette. Also the basic patterns of waistline garments (those you wear on your lower half), namely skirts, divided skirt, men's and lady's pants and jeans, men's loose-fitting pants and men's pants with lowered belt.

In version 2.57 calculation of bases is specified on experience of several years of use. It is separately important to note realization of exact calculation of lengths cap sleeves on length of an armhole taking into account H entered by the user - norm of reduction on 1 cm of an armhole.

  Each customer is provided with a copy of full version of the program. If you want to learn more, please download a demo-version of Cutter 2.57 here! ZIP archive, 729 KB. In the demo version a printout of all patterns, except for a skirt and lady's pants, is removed. It doesn't need to be installed to your computer. Unpack the archive and start Cutter.exe. Will help you to test the program the table of a typical figures measurements.

Also you can download the freeware version of program Cutter 1.44 lite free!. here! ZIP archive, 539 KB. The basic patterns of waistline garments are included in this version. Namely skirts, divided skirt, men's and lady's pants and jeans and men's loose-fitting pants.

If you are interested in purchasing a license (USD $40), download a demo-version of Cutter 2.57 and go to Help>Buy Full Version.. in the Main Menu. If you have any questions in regards the order, or the program or any questions on how it works please write me a letter . It will be replied in 2-3 days.

The provisional estimation of a recoupment of the program can be made so: we shall assume an average cost of an order $25. Cutting is usually estimated in 30 % from cost of an order. We shall reset on necessity of modelling, also we shall add because the program gives speed and quality. We have 40/7.5=5,3 the recoupment after 5 - 10 orders.

Customer Care Center Quickbuy

Example of pants designed on the patterns that calculated in this program

View the examples in greater size View the examples in greater size View the examples in greater size View the examples in greater size
Are made for school of modern dance "Belka"(Squirrel) in Vitebsk. Head is Puchko N.P..

Screen shot and awards JFCreator — fractals generator. Version 1.02. Vieiewing of bewitching images of fractal Julia easily received in program JFPCreator removes a stress and improves mood. The program allows to observe deformations a fractal structures "in real time" at change of factors, has ampleopportunitiess of selection of a palette, scaling and a choice of viewing area. The liked images can be kept in fractal a format, it is compact and without loss of quality, to look through on all screen and in the mode of slide-show. The help file contains the full description and can facilitate development of the programessentially.

Download the JFCreator 1.02 here! The program JFCreator 1.02 in ZIP archive. Its size is 496 kb. It does not demand installation. Unpack in the desirable catalogue and execute JFCreator.exe.

Some fractals from JFCreator

To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size.


To the image of the greater size. The program shows strange attractor. The static image is not enough interestingly, but when it is transformed at change of parameters... Is on what to look. The intuitive interface allows to choose initial value of each parameter, a step of change, Range for automatic transformation. Is direct to operate transformation. To choose attractor and background colors and number of iterations. The detailed description in the file Read_me!.txt in the catalogue of the program. FreeWare.

Download here! In ZIP archive. Its size is 374 kb. It does not demand installation. Unpack in the desirable catalogue and execute S-Attractor.exe

To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size. To the image of the greater size.

See more on:
lifeisphoto.ru
PHOTOSIGHT.RU
 |  Cutter 2.57 | JFCreator |  S-Attractor | Photos | 

Home page of Dmitry Pavlov. Is made 22.03.2003 - 10.07.2012 Copyright © 2003-2012, Dmitry Pavlov
E-mail:support@dmitriy-prog.ru |  Russian version